how to bind a pointed table runner?
To bind a pointed table runner, you will need to first cut your binding strips to the appropriate length and width. Then, sew the binding strips together to create one long strip. Next, fold the binding strip in half lengthwise and press it with an iron.
Starting at one of the pointed ends of the table runner, align the raw edges of the binding strip with the raw edge of the runner and pin in place. Sew the binding to the runner using a ¼ inch seam allowance, stopping about ¼ inch from the end of the point.
Fold the binding strip up and away from the runner at a 45-degree angle, then fold it back down over itself so that the folded edge aligns with the next raw edge of the runner. Pin in place and continue sewing the binding to the runner, repeating this process at each point.
When you reach the starting point, fold the end of the binding strip under and tuck it inside the folded end of the beginning of the strip. Sew the two ends together and finish sewing the binding to the runner. Finally, fold the binding over the raw edge of the runner and hand stitch it in place on the back side of the runner.
1、 Sewing techniques for pointed table runners
How to bind a pointed table runner:
Binding a pointed table runner can be a bit tricky, but with the right technique, it can be done easily. Here are the steps to follow:
1. Cut your binding strips: Cut your binding strips to the desired width and length. Make sure to cut enough strips to cover the entire perimeter of your table runner.
2. Sew the binding strips together: Sew the binding strips together at a 45-degree angle to create a continuous strip. Press the seams open.
3. Fold the binding in half: Fold the binding in half lengthwise, wrong sides together, and press.
4. Attach the binding to the table runner: Starting at the center of one of the straight edges of the table runner, align the raw edges of the binding with the raw edge of the table runner. Pin in place and sew using a ¼ inch seam allowance. Stop sewing ¼ inch from the corner.
5. Miter the corners: Fold the binding up and away from the table runner, creating a 45-degree angle. Then fold the binding back down, aligning the raw edges with the next side of the table runner. Pin in place and sew to the next corner. Repeat this process for all four corners.
6. Finish the binding: When you reach the starting point, overlap the binding by ½ inch and sew in place. Fold the binding over the raw edge of the table runner and hand-stitch in place.
Sewing techniques for pointed table runners:
There are many sewing techniques that can be used to create pointed table runners. One popular technique is to use foundation paper piecing. This technique involves sewing fabric pieces onto a paper foundation, which helps to create precise points and angles.
Another technique is to use applique. This involves cutting out fabric shapes and sewing them onto a background fabric. This technique can be used to create intricate designs and patterns.
Quilting is also a popular technique for creating pointed table runners. This involves sewing together layers of fabric and batting to create a quilted design. Quilting can be done by hand or by machine, and can be used to create a variety of designs and patterns.
In recent years, there has been a growing trend towards using sustainable and eco-friendly materials in sewing projects. This includes using organic cotton fabrics, recycled materials, and natural dyes. These materials can be used to create beautiful and unique pointed table runners that are both stylish and environmentally friendly.
2、 Materials needed for binding a pointed table runner
How to bind a pointed table runner:
1. Cut your binding strips: You will need enough binding strips to go around the entire perimeter of your table runner. Cut your strips to be 2.5 inches wide and the length of your fabric.
2. Sew your binding strips together: Take two of your binding strips and place them right sides together at a 90-degree angle. Sew diagonally from one corner to the other. Trim the excess fabric and press the seam open. Repeat this process until all of your binding strips are sewn together.
3. Press your binding in half: Fold your binding in half lengthwise and press it with an iron.
4. Attach your binding to your table runner: Starting in the middle of one of the straight edges of your table runner, pin your binding to the right side of your fabric. Leave a tail of binding about 6 inches long. Sew the binding to your fabric using a 1/4 inch seam allowance.
5. Miter your corners: When you reach a corner, stop sewing 1/4 inch from the edge. Fold your binding up at a 45-degree angle, then fold it back down so that the raw edge lines up with the next edge of your table runner. Pin in place and continue sewing.
6. Finish your binding: When you reach the end of your binding, fold the tail up and over the binding, then fold it down and sew it in place.
Materials needed for binding a pointed table runner:
- Fabric for your table runner
- Fabric for your binding
- Sewing machine
- Thread
- Pins
- Scissors
- Iron
The latest point of view on binding a pointed table runner is to use a bias binding instead of a straight binding. A bias binding is cut on the bias of the fabric, which allows it to stretch and curve around the corners of your table runner more easily. This can result in a smoother, more professional-looking finish. Additionally, some people prefer to use a contrasting fabric for their binding to add a pop of color or interest to their table runner.
3、 Tips for achieving a professional-looking finish
How to bind a pointed table runner:
1. Cut your fabric: Cut your fabric to the desired size of your table runner. Cut the binding strips to the desired width and length.
2. Sew the binding strips: Sew the binding strips together to create one long strip. Fold the strip in half lengthwise and press.
3. Attach the binding: Starting at the center of one of the pointed ends, pin the binding to the right side of the runner, matching raw edges. Sew the binding to the runner using a 1/4 inch seam allowance.
4. Miter the corners: When you reach a corner, stop sewing 1/4 inch from the edge. Fold the binding up and away from the runner, then back down, aligning the raw edges. Continue sewing along the next edge.
5. Finish the binding: When you reach the starting point, overlap the binding ends and trim. Fold the binding to the back of the runner and hand stitch in place.
Tips for achieving a professional-looking finish:
1. Use high-quality fabric: Choose a fabric that is durable and easy to work with. A high-quality fabric will give your table runner a professional look.
2. Press your fabric: Press your fabric before cutting and sewing to ensure that it is smooth and free of wrinkles.
3. Use a rotary cutter: A rotary cutter will give you clean, straight edges and make cutting your fabric easier.
4. Take your time: Rushing through the process can lead to mistakes and a less-than-perfect finish. Take your time and pay attention to the details.
5. Practice your stitching: Practice your stitching on scrap fabric before sewing your table runner. This will help you get comfortable with the process and ensure that your stitches are even and straight.
6. Consider adding embellishments: Adding embellishments like embroidery or applique can give your table runner a unique and professional look.
In today's world, sustainability is also an important factor to consider. You can use eco-friendly fabrics like organic cotton or linen to make your table runner. Additionally, you can use natural dyes to add color to your fabric. These choices not only make your table runner look professional but also contribute to a sustainable environment.
4、 Different binding methods for pointed table runners
How to bind a pointed table runner:
Binding a pointed table runner can be a bit tricky, but with the right technique, it can be done easily. Here are the steps to bind a pointed table runner:
1. Cut your binding strips: Cut your binding strips to the desired width and length. You will need enough strips to go around the entire perimeter of your table runner.
2. Sew the binding strips together: Sew the binding strips together at a 45-degree angle to create a continuous strip.
3. Press the binding strip: Press the binding strip in half lengthwise, wrong sides together.
4. Pin the binding to the table runner: Pin the binding to the right side of the table runner, starting at the center of one of the straight edges.
5. Sew the binding to the table runner: Sew the binding to the table runner, using a ¼ inch seam allowance. Stop sewing ¼ inch from the corner.
6. Fold the binding: Fold the binding up and away from the table runner, creating a 45-degree angle.
7. Fold the binding back down: Fold the binding back down, aligning the raw edges with the next side of the table runner.
8. Sew the binding to the next side: Sew the binding to the next side, starting ¼ inch from the corner.
9. Repeat steps 6-8: Repeat steps 6-8 for each corner until you reach the starting point.
10. Finish the binding: Finish the binding by folding the end under and sewing it in place.
Different binding methods for pointed table runners:
There are several different binding methods for pointed table runners, including bias binding, double-fold binding, and single-fold binding. Bias binding is a great option for pointed table runners because it allows the binding to curve around the points without puckering. Double-fold binding is another option that provides a clean, finished edge. Single-fold binding is the easiest and quickest method, but it may not provide as clean of a finish as the other methods.
In recent years, there has been a trend towards using unconventional materials for binding, such as leather or ribbon. These materials can add a unique touch to your pointed table runner and can be a fun way to experiment with different textures and colors. Ultimately, the binding method you choose will depend on your personal preference and the look you are trying to achieve.