how to make a table runner with batting?
To make a table runner with batting, you will need the following materials: fabric for the top and bottom layers of the runner, batting, sewing machine, thread, scissors, and pins.
1. Start by measuring the desired length and width of your table runner. Cut the fabric for the top layer and bottom layer to these dimensions, adding an extra 1 inch on each side for seam allowance.
2. Cut a piece of batting to the same dimensions as the fabric layers.
3. Place the bottom layer of fabric right side down on your work surface. Lay the batting on top of it, followed by the top layer of fabric right side up.
4. Pin all three layers together, making sure they are aligned properly.
5. Sew around the edges of the table runner, leaving a small opening for turning it right side out.
6. Trim the excess fabric and batting from the corners, being careful not to cut through the stitches.
7. Turn the table runner right side out through the opening.
8. Press the edges of the table runner with an iron to create crisp edges.
9. Finally, sew a topstitch around the entire table runner, closing the opening and giving it a finished look.
Your table runner with batting is now ready to be used and enjoyed!
1、 Choosing the right batting for your table runner
Choosing the right batting for your table runner is an important step in creating a beautiful and functional piece. Batting is the layer of material that goes between the top and bottom layers of fabric, providing thickness, warmth, and stability to your table runner. Here's a guide on how to make a table runner with batting:
1. Measure and cut your fabric: Start by measuring the length and width of your table and add a few inches to each measurement for seam allowances. Cut your top fabric, backing fabric, and batting to these dimensions.
2. Layer the fabrics: Lay your backing fabric right side down, then place the batting on top, followed by the top fabric right side up. Make sure all the edges are aligned.
3. Pin the layers together: Use safety pins or basting spray to secure the layers together. This will prevent shifting during the sewing process.
4. Quilt the layers: Decide on a quilting pattern and stitch through all layers to secure them together. You can choose to do simple straight lines, free-motion quilting, or any other design that suits your style.
5. Trim the excess: Once you have finished quilting, trim the excess batting and fabric, leaving a small border around the edges.
6. Finish the edges: Fold the edges of the table runner under and press them in place. You can then stitch a straight line around the perimeter to secure the edges.
By following these steps, you can create a table runner with batting that not only adds a layer of warmth and stability but also enhances the overall aesthetic of your table setting. Remember to choose a batting that suits your desired level of thickness and insulation, as well as one that is machine washable and durable.
2、 Measuring and cutting the batting for your table runner
To make a table runner with batting, you will need to start by measuring and cutting the batting to the desired size. Batting is a layer of padding that adds thickness and softness to your table runner.
First, measure the length and width of your table to determine the size of the runner you want. Add a few inches to each measurement to allow for overhang on the sides. This will ensure that the runner covers the table nicely.
Next, lay out the batting on a flat surface and use a ruler or measuring tape to mark the measurements you took earlier. Use a pair of fabric scissors to carefully cut along the marked lines. Make sure to cut straight and even to achieve a professional-looking finish.
Once the batting is cut to size, you can proceed with adding the fabric layers to create the table runner. Place the batting in between two pieces of fabric, with the right sides of the fabric facing outwards. Pin the layers together to hold them in place.
Now, you can sew around the edges of the table runner, leaving a small opening to turn it right side out. After turning it, you can hand stitch the opening closed or use a sewing machine to finish it off.
Finally, press the table runner with an iron to remove any wrinkles and give it a polished look. Your table runner with batting is now ready to be placed on your table, adding a touch of elegance and protection.
In conclusion, measuring and cutting the batting for your table runner is an essential step in creating a beautiful and functional piece. It ensures that the runner fits your table perfectly and provides the desired level of padding.
3、 Layering the fabric and batting for your table runner
To make a table runner with batting, you will need a few materials including fabric, batting, scissors, pins, a sewing machine, and thread. Here is a step-by-step guide on how to create a table runner with batting:
1. Measure and cut your fabric: Determine the desired length and width of your table runner. Add an extra inch to each measurement for seam allowances. Cut your fabric accordingly.
2. Prepare the batting: Cut a piece of batting to match the size of your fabric. Make sure the batting is slightly smaller than the fabric to avoid it peeking out from the edges.
3. Layer the fabric and batting: Place the fabric right side down on a flat surface. Then, place the batting on top of the fabric, aligning the edges. Smooth out any wrinkles or creases.
4. Pin the layers together: Use straight pins to secure the layers in place. Space the pins evenly along the edges, making sure to catch all layers.
5. Sew the layers together: Set up your sewing machine with a coordinating thread color. Sew a straight stitch along the edges, about ¼ inch from the edge. This will secure the layers together and create a neat border.
6. Trim the excess batting: Once you have sewn the layers together, trim any excess batting that may be sticking out from the edges. Be careful not to cut into the fabric.
7. Finish the edges: Fold the raw edges of the fabric under and sew a straight stitch along each side to create a clean finish.
8. Press the table runner: Use an iron to press the table runner, ensuring that all the layers are smooth and flat.
By following these steps, you can create a beautiful table runner with batting that adds both style and functionality to your dining table.
4、 Quilting techniques for your table runner with batting
Quilting techniques for your table runner with batting:
If you're looking to add a touch of elegance and warmth to your dining table, a table runner with batting is the perfect project for you. Not only does it protect your table from scratches and spills, but it also adds a beautiful decorative element to your dining space. Here's a step-by-step guide on how to make a table runner with batting:
1. Gather your materials: You'll need fabric for the top and bottom of the runner, batting, coordinating thread, scissors, pins, and a sewing machine.
2. Measure and cut your fabric: Determine the desired length and width of your table runner. Add an extra inch to each measurement for seam allowances. Cut your top and bottom fabric to these dimensions.
3. Layer the fabrics: Place the top fabric right side up, followed by the batting, and then the bottom fabric right side down. Pin the layers together to prevent shifting.
4. Sew the layers together: Using a ¼ inch seam allowance, sew around the edges of the runner, leaving a small opening for turning.
5. Trim the corners and turn right side out: Trim the excess fabric from the corners to reduce bulk. Carefully turn the runner right side out through the opening. Use a blunt tool, such as a chopstick, to push out the corners for a crisp finish.
6. Press and topstitch: Press the table runner to remove any wrinkles. Then, topstitch around the edges, closing the opening as you go.
7. Quilt the runner: To add texture and stability, you can quilt the table runner. Choose a quilting design that complements your fabric and use a walking foot on your sewing machine for even stitching.
8. Finish the edges: Finally, finish the edges of the table runner by folding the fabric under and sewing a narrow hem.
By following these steps, you'll create a beautiful table runner with batting that will enhance the ambiance of your dining area. Experiment with different fabrics, colors, and quilting designs to personalize your creation and make it truly unique.