how to make an insulated table runner?
To make an insulated table runner, you will need some insulated batting, fabric for the top and bottom, and basic sewing supplies such as a sewing machine, thread, and scissors.
First, measure the length and width of your table and add a few inches to each measurement to determine the size of your table runner. Cut the insulated batting to the same size as your measurements.
Next, cut your fabric for the top and bottom to the same size as the batting. Place the fabric for the top right side up, then place the batting on top of it. Pin the layers together.
Quilt the layers together by sewing straight lines across the runner, about 2-3 inches apart.
Once the quilting is complete, place the fabric for the bottom right side down on top of the batting. Pin the layers together.
Sew around the edges of the runner, leaving a small opening to turn it right side out. Turn the runner right side out and sew the opening closed.
Your insulated table runner is now complete and ready to use!
1、 Materials needed for making an insulated table runner
How to make an insulated table runner:
An insulated table runner is a great addition to any dining table, especially during the colder months. It not only adds a decorative touch but also helps to keep your table warm and cozy. Here are the steps to make an insulated table runner:
Step 1: Measure your table and cut a piece of fabric to the desired length and width of your table runner.
Step 2: Cut a piece of insulated batting to the same size as your fabric.
Step 3: Place the insulated batting on top of the wrong side of the fabric and pin in place.
Step 4: Sew around the edges of the fabric and batting, leaving a small opening to turn the runner right side out.
Step 5: Turn the runner right side out and sew the opening closed.
Step 6: Quilt the runner by sewing straight lines or a pattern of your choice through the fabric and batting.
Step 7: Add any additional embellishments, such as tassels or fringe, if desired.
Materials needed for making an insulated table runner:
- Fabric of your choice
- Insulated batting
- Sewing machine
- Thread
- Pins
- Scissors
- Ruler or measuring tape
- Iron and ironing board
- Embellishments (optional)
In recent times, there has been an increased interest in sustainable and eco-friendly materials for home decor. Consider using organic cotton or linen fabric and natural wool or bamboo batting for your insulated table runner. These materials are not only better for the environment but also provide a luxurious and soft feel to your table runner. Additionally, you can experiment with different colors and patterns to match your home decor style.
2、 Measuring and cutting the fabric and insulation
How to make an insulated table runner? The first step is to measure and cut the fabric and insulation. You will need to measure the length and width of your table and add a few inches to each measurement to allow for overhang. Then, cut a piece of insulated batting to match the size of your fabric.
Next, place the fabric right side down on a flat surface and place the insulated batting on top of it. Make sure the edges are aligned and smooth out any wrinkles. Pin the layers together around the edges to keep them in place.
Now it's time to sew the layers together. Using a sewing machine, stitch around the edges of the fabric and batting, leaving a small gap for turning. Once you have sewn around the edges, trim any excess fabric and batting.
Turn the table runner right side out through the gap you left in the stitching. Use a pencil or chopstick to push out the corners and smooth out any wrinkles.
Finally, sew the gap closed by hand or with a sewing machine. You can add decorative stitching around the edges if you like.
An insulated table runner is a great way to protect your table from heat and spills while adding a decorative touch to your dining room. With a few simple steps, you can create a custom table runner that will keep your table looking great for years to come.
3、 Sewing the layers together
How to make an insulated table runner? An insulated table runner is a great addition to your dining table, especially during the colder months. It not only adds a decorative touch but also protects your table from hot dishes. Here's how you can make one:
1. Choose your fabric: You'll need two pieces of fabric, one for the top and one for the bottom. Choose a fabric that is thick and durable, such as cotton or linen.
2. Cut your fabric: Cut both pieces of fabric to the desired size of your table runner. Make sure to add an extra inch on all sides for seam allowance.
3. Cut your batting: Cut a piece of batting to the same size as your fabric pieces. Insulated batting is available at most fabric stores and will help protect your table from heat.
4. Layer your fabric: Place the bottom piece of fabric right side down, then place the batting on top. Finally, place the top piece of fabric right side up.
5. Pin the layers together: Pin the layers together to prevent them from shifting while sewing.
6. Sew the layers together: Using a sewing machine, sew around the edges of the table runner, leaving a 2-inch gap for turning.
7. Turn the table runner right side out: Carefully turn the table runner right side out through the gap.
8. Sew the gap closed: Using a needle and thread, sew the gap closed.
Your insulated table runner is now ready to use! It's a great way to add a touch of warmth and style to your dining table while protecting it from hot dishes.
4、 Adding finishing touches such as binding or edging
How to make an insulated table runner:
1. Choose your fabric: For an insulated table runner, you will need two pieces of fabric - one for the top and one for the bottom. Choose a fabric that is thick and sturdy, such as cotton or linen.
2. Cut your fabric: Cut both pieces of fabric to the desired size of your table runner. Make sure to leave a seam allowance of at least 1/2 inch on all sides.
3. Add insulation: To make your table runner insulated, you will need to add a layer of batting or insulated fabric between the two layers of fabric. Cut the insulation to the same size as your fabric pieces and place it between the two layers.
4. Sew the layers together: Pin the layers together and sew around the edges, leaving a small opening to turn the table runner right side out. Once you have turned it right side out, sew the opening closed.
5. Quilt the layers together: To ensure that the insulation stays in place, you can quilt the layers together. This can be done by sewing straight lines or a decorative pattern across the table runner.
6. Adding finishing touches: Once you have quilted the layers together, you can add finishing touches such as binding or edging. This will give your table runner a polished look and help to prevent fraying.
In today's world, where sustainability and eco-friendliness are becoming increasingly important, using an insulated table runner can be a great way to reduce energy consumption. By keeping your table warmer, you can reduce the need for heating and save on energy costs. Additionally, an insulated table runner can help to protect your table from spills and stains, making it a practical and stylish addition to any home.