how to bind a quilted table runner?
To bind a quilted table runner, first trim the edges of the runner to make them even and straight. Then, cut strips of binding fabric on the bias (diagonally across the fabric) that are 2.5 inches wide and long enough to go around the entire perimeter of the runner plus a few extra inches. Sew the strips together end-to-end to create one long strip.
Fold the binding strip in half lengthwise and press it with an iron. Starting in the middle of one side of the runner, align the raw edges of the binding strip with the raw edges of the runner and sew them together using a ¼ inch seam allowance. Stop sewing ¼ inch from the corner, backstitch, and then remove the runner from the sewing machine.
Fold the binding strip up at a 45-degree angle, then fold it back down so that the fold aligns with the top edge of the runner. Continue sewing along the next side, repeating the process at each corner. When you reach the starting point, overlap the binding strip by a few inches and sew it in place.
Fold the binding strip over the raw edges of the runner to the back side and hand-stitch it in place using a blind stitch. Press the runner with an iron and it is ready to use.
1、 Straight Line Quilting
How to Bind a Quilted Table Runner:
Binding a quilted table runner is the final step in completing your project. It not only gives a finished look to your table runner but also helps to protect the edges of the quilt from fraying. Here are the steps to bind a quilted table runner:
1. Cut your binding strips: Cut your binding strips from your chosen fabric. The width of the strips should be 2.5 inches and the length should be the total perimeter of your table runner plus 10 inches.
2. Join the strips: Join the strips together at a 45-degree angle to create one long strip.
3. Press the binding: Press the binding in half lengthwise, wrong sides together.
4. Attach the binding: Starting in the middle of one side of the table runner, align the raw edges of the binding with the raw edges of the quilted table runner. Sew the binding to the quilted table runner using a ¼ inch seam allowance.
5. Miter the corners: When you reach a corner, stop sewing ¼ inch from the edge, fold the binding up and away from the quilt at a 45-degree angle, then fold it back down over itself, aligning the raw edges with the next side of the quilt. Continue sewing.
6. Finish the binding: When you reach the starting point, overlap the binding ends and sew them together. Trim the excess binding.
Straight Line Quilting:
Straight line quilting is a popular quilting technique that involves sewing straight lines of stitching across the quilt top. It is a great way to add texture and interest to your quilted table runner. Here are some tips for straight line quilting:
1. Use a walking foot: A walking foot helps to feed the layers of the quilt evenly through the machine, preventing puckering and shifting.
2. Mark your lines: Use a ruler and a fabric marker to mark your quilting lines. This will help you to keep your lines straight and evenly spaced.
3. Start in the middle: Start quilting in the middle of the table runner and work your way out to the edges. This will help to prevent puckering and shifting.
4. Use a longer stitch length: A longer stitch length will help to prevent puckering and give a more modern look to your quilted table runner.
5. Experiment with different designs: Straight line quilting doesn't have to be boring. Experiment with different designs, such as diagonal lines or a grid pattern, to add interest to your quilted table runner.
2、 Free Motion Quilting
How to bind a quilted table runner:
1. Trim the edges of the table runner to ensure they are straight and even.
2. Cut binding strips from your chosen fabric. The width of the strips should be 2.5 inches and the length should be the perimeter of the table runner plus 10 inches.
3. Sew the binding strips together end-to-end to create one long strip.
4. Fold the binding strip in half lengthwise and press.
5. Starting in the middle of one side of the table runner, align the raw edges of the binding strip with the raw edge of the table runner. Leave a 6-inch tail of binding strip at the beginning.
6. Sew the binding strip to the table runner using a ¼ inch seam allowance. Stop sewing ¼ inch from the corner and backstitch.
7. Fold the binding strip up at a 45-degree angle, then fold it back down over itself, aligning the raw edges with the next side of the table runner. Continue sewing, repeating this process at each corner.
8. When you reach the starting point, overlap the binding strip and trim the excess. Fold the end of the binding strip under and sew in place to finish.
9. Press the binding away from the table runner and then fold it over to the back of the table runner.
10. Hand stitch the binding to the back of the table runner using a blind stitch.
Free Motion Quilting:
Free motion quilting is a technique where the quilter moves the fabric under the needle of the sewing machine to create a design. This technique allows for more creativity and flexibility in the quilting process. It can be used to create intricate designs or to add texture to a quilt. Free motion quilting requires practice and patience, but it can be a rewarding way to add a personal touch to your quilts. Some tips for successful free motion quilting include using the right needle and thread, practicing on scrap fabric before starting on your quilt, and taking breaks to avoid fatigue. Additionally, it's important to have a good understanding of the design you want to create before starting to quilt. With practice and experimentation, free motion quilting can become a fun and satisfying part of the quilting process.
3、 Hand Quilting
How to Bind a Quilted Table Runner:
Binding a quilted table runner is the final step in completing your project. Here are the steps to follow:
1. Cut your binding strips: Cut your binding strips 2.5 inches wide and the length of your table runner plus 10 inches. Join the strips together to make one long strip.
2. Press the binding: Fold the binding strip in half lengthwise and press it with an iron.
3. Attach the binding: Starting in the middle of one side of the table runner, align the raw edges of the binding with the raw edges of the quilted top. Sew the binding to the quilted top using a ¼ inch seam allowance. Stop sewing ¼ inch from the corner.
4. Miter the corners: Fold the binding up and away from the quilted top, creating a 45-degree angle. Fold the binding back down, aligning the raw edges with the next side of the table runner. Sew the binding to the next side, starting ¼ inch from the corner. Repeat for all corners.
5. Finish the binding: When you reach the starting point, overlap the binding by ½ inch and sew it in place. Fold the binding to the back of the table runner and hand stitch it in place.
Hand Quilting:
Hand quilting is a traditional method of quilting that involves stitching the layers of a quilt together by hand. It is a time-consuming process, but it produces beautiful results. Hand quilting can be done using a variety of stitches, including running stitch, backstitch, and whipstitch.
Hand quilting is a great way to add a personal touch to your quilting projects. It allows you to create unique designs and patterns that cannot be achieved with a machine. Hand quilting also gives you more control over the stitching, allowing you to adjust the tension and stitch length as needed.
While hand quilting may take longer than machine quilting, it can be a relaxing and enjoyable process. It is a great way to unwind and de-stress while creating something beautiful. Hand quilting is also a great way to connect with the history and tradition of quilting, as it has been practiced for centuries.
4、 Machine Binding
Machine Binding is a popular and efficient way to bind a quilted table runner. Here are the steps to follow:
1. Trim the edges of the table runner to make them even and straight.
2. Cut binding strips from your chosen fabric. The width of the strips should be 2.5 inches and the length should be enough to go around the entire perimeter of the table runner.
3. Sew the binding strips together to make one long strip. Fold the strip in half lengthwise and press it with an iron.
4. Starting in the middle of one side of the table runner, align the raw edges of the binding strip with the raw edges of the table runner. Leave a tail of about 6 inches at the beginning.
5. Using a walking foot on your sewing machine, sew the binding to the table runner with a ¼ inch seam allowance. Stop sewing ¼ inch from the corner, backstitch, and then remove the table runner from the machine.
6. Fold the binding up at a 45-degree angle, then fold it back down over itself, aligning the raw edges with the next side of the table runner. Continue sewing the binding to the table runner, repeating this process at each corner.
7. When you reach the starting point, overlap the binding tails by about 6 inches and trim the excess. Fold the binding over the raw edges of the table runner and sew it down by machine or hand.
Machine binding is a quick and easy way to finish a quilted table runner. It provides a clean and professional look to your project. With the right tools and techniques, you can create a beautiful and functional table runner that will last for years to come.