how to make a self binding table runner?
To make a self-binding table runner, first, cut a piece of fabric for the runner and a second piece for the binding. The binding piece should be 2.5 inches wider than the runner on all sides. Place the runner fabric right side up and lay the binding fabric on top, right side down. Pin the two pieces together and sew around the edges, leaving a 6-inch gap for turning. Trim the corners and turn the runner right side out. Fold the edges of the binding fabric over the runner and pin in place. Sew around the edges of the runner, making sure to catch the folded edges of the binding fabric. Finally, sew the gap closed and press the runner.
1、 Materials needed for a self-binding table runner
How to make a self-binding table runner:
1. Cut your fabric to the desired size of your table runner. Make sure to add an extra 1 inch to the length and width for seam allowances.
2. Cut a strip of fabric for the binding. The width of the strip should be 2.5 inches and the length should be the perimeter of your table runner plus 2 inches.
3. Fold the binding strip in half lengthwise and press.
4. Place the binding strip on top of the table runner, right sides together, and pin in place.
5. Sew the binding strip to the table runner using a 1/4 inch seam allowance.
6. Fold the binding strip up and over the raw edge of the table runner and press.
7. Fold the binding strip over again, covering the raw edge of the table runner, and pin in place.
8. Sew the binding strip in place, making sure to catch both sides of the binding in your stitching.
9. Trim any excess binding fabric and threads.
10. Your self-binding table runner is now complete!
Materials needed for a self-binding table runner:
- Fabric for the table runner
- Fabric for the binding
- Sewing machine
- Thread
- Pins
- Scissors
- Iron
Self-binding table runners are a great way to add a decorative touch to your dining table or any other surface in your home. They are easy to make and can be customized to match your decor. With the right materials and a little bit of sewing know-how, you can create a beautiful self-binding table runner in no time.
2、 Measuring and cutting the fabric for the table runner
How to make a self-binding table runner:
Measuring and cutting the fabric for the table runner is the first step in creating a beautiful and functional self-binding table runner. To begin, measure the length and width of your table and add a few inches to each measurement to allow for overhang and drape. This will be the size of your table runner.
Next, choose a fabric that complements your decor and fits the size of your table. Cut the fabric to the size of your table runner, making sure to cut it straight and even. If you want a patterned or printed fabric, make sure to align the pattern correctly before cutting.
Once you have your fabric cut to size, it's time to create the self-binding. To do this, fold the edges of the fabric over twice, about 1/2 inch each time, and press with an iron. This will create a clean, finished edge that will not fray.
Finally, fold the corners of the fabric in at a 45-degree angle and then fold the sides in to create a mitered corner. Pin the corners in place and sew along the edge of the binding, making sure to catch both sides of the fabric.
With these simple steps, you can create a beautiful and functional self-binding table runner that will add style and elegance to any table setting.
3、 Sewing the table runner and creating the self-binding
How to make a self-binding table runner? There are a few steps involved in creating a self-binding table runner, but it is a relatively simple project that can be completed in just a few hours.
First, choose your fabric. You will need a piece of fabric for the main body of the table runner and a coordinating fabric for the binding. Cut your main fabric to the desired size of your table runner, adding an extra inch to each side for seam allowances.
Next, cut your binding fabric into strips that are 2.5 inches wide. You will need enough strips to go around the entire perimeter of your table runner.
Sew the strips together end-to-end to create one long strip. Press the seams open.
Fold the binding strip in half lengthwise, wrong sides together, and press.
Pin the binding strip to the right side of the table runner, starting in the middle of one of the long sides. Leave a few inches of binding loose at the beginning and end.
Sew the binding to the table runner, using a ¼ inch seam allowance. When you reach a corner, stop sewing ¼ inch from the edge, pivot the fabric, and continue sewing down the next side.
When you reach the end, fold the loose ends of the binding under and sew them in place.
Finally, fold the binding over the edge of the table runner to the back side and hand stitch it in place.
Sewing the table runner and creating the self-binding is a great way to add a personal touch to your dining room decor. With a little bit of time and effort, you can create a beautiful and functional table runner that will be the envy of all your guests.
4、 Turning the table runner right side out and pressing
How to make a self binding table runner:
1. Cut your fabric to the desired size of your table runner.
2. Cut a strip of fabric for the binding that is 2.5 inches wide and the length of your table runner plus 10 inches.
3. Fold the binding strip in half lengthwise and press.
4. Place the binding strip right sides together with the table runner and sew along the edge with a ¼ inch seam allowance.
5. Fold the binding strip up and over the raw edge of the table runner and press.
6. Fold the binding strip over again, covering the raw edge of the table runner, and pin in place.
7. Sew along the edge of the binding strip, making sure to catch both layers of fabric.
8. Trim any excess binding fabric.
9. Turn the table runner right side out and press.
The self-binding technique is a great way to finish off a table runner without having to add a separate binding. It creates a clean and polished look that is perfect for any table setting. One thing to keep in mind when making a self-binding table runner is to make sure that your binding strip is long enough to cover the entire edge of the runner. It's better to have a little extra than to come up short. Additionally, you can add some decorative stitching along the edge of the binding strip to give your table runner a little extra flair. Overall, making a self-binding table runner is a simple and easy project that can be completed in just a few hours.